Seca Specs

 

Home
Up
Motorcycle Blog
Motorcycle Trips
Motorcycle Costs
Motorcycle Products
Seca Specs

 

 

Here are specifications for the Seca. The first part is from my Owners Manual. The second part is from info I have gleaned from the internet and / or estimated from information gleaned. If you see an error - let me know:

Specifications (From Owners Manual)

1992 Yamaha SECA II (XJ600SD)

Dimensions:

Overall length 2,095 mm (82.5 in)

Overall width 750 mm (29.5 in)

Overall height 1,170 mm (46.1 in)

Seat height 770 mm (30.3 in)

Wheel base 1,445 mm (56.9 in)

Minimum ground clearance 150 mm (5.9 in)

Basic Weight:

With oil and full fuel tank 197 kg (434 lbs)

Minimum turning radius: 

2,600 mm (102 in)

Engine:

Type Air cooled, 4-stroke, gasoline, DOHC

Model 4DU3

Cylinder Arrangement Parallel 4-cylinder, Forward inclined

Displacement 598.8 cm3

Bore x Stroke 58.5 x 55.7 mm (2.30 x 2.19 in)

Compression ratio 10:1

Starting system Electric starter

Lubrication system Wet sump

Engine Oil (4-cycle):

Type

Yamalube 4 (20W40) or SAE 20W40 type SE motor oil (if temperature does not go below 5 C / 40 F)

Yamalube 4 (10W30) or SAE 10W30 type SE motor oil (if temperature does not go above 15 C / 60 F)

Capacity

Periodic oil change 2.2 L (1.9 Imp qt., 2.3 US qt.)

With oil filter replacement 2.5 L (2.2 Imp qt., 2.6 US qt.)

Total amount 2.9 L (2.6 Imp qt., 3.1 US qt.)

Air filter:

Dry type element

Fuel:

Type Regular unleaded gasoline

Tank capacity 17.0 L (3.7 Imp gal, 4.5 US gal)

Reserve amount 3.5 L (0.8 Imp gal, 0.9 US gal)

Carburetor:

Type / manufacturer BDST28 / Mikuni

Spark plug:

Type / manufacturer CR8E / NGK, U24ESR-N / Nippondenso

Gap 0.7 ~ 0.8 mm (0.028 ~ 0.031 in)

Clutch type:

Wet, multi-disk

Transmission:

Primary reduction system Chain / gear

Primary reduction ratio 23 / 24 x 65 / 28 (2.225)

Secondary reduction system Chain drive

Secondary reduction ratio 48 / 16 (3.000)

Transmission type Constant mesh 6-speed

Operation Left foot operation

 Gear ratio

1st 41 / 15 (2.733)

2nd 32 / 18 (1.778)

3rd 28 / 21 (1.333)

4th 29 / 27 (1.074)

5th 21 / 23 (0.913)

6th 23 / 28 (0.821)

Chassis:

Frame type Double cradle

Caster angle 25 Deg.

Trail 97 mm (3.8 in)

Tire:

Type Tubeless

Size Front 110 / 80-17 57H

        Rear 130 / 70-18 63H

Brake:

Front brake type Single, Disc brake

Operation Right hand operation

Rear brake type Single, Disc brake

Operation Right foot operation

Suspension:

Front Telescopic fork

Rear Swing arm (Monocross suspension)

Shock absorber:

Front Coil spring, Oil damper

Rear Gas, Coil spring, Oil damper

Wheel travel

Front 140 mm (5.5 in)

Rear 110 mm (4.3 in)

Electrical:

Ignition system TCI (Digital)

Generator system AC magneto generator

Battery type / capacity YTX9-BS, GTX9-BS / 12V 8AH

Headlight type:

Quartz bulb

Bulb wattage / quantity:

Headlight 12V 60W / 55W x 1

Tail / brake light 12V 21W / 5W x 1

Flasher light Front 12V 27W / 8W x 2

                   Rear 12V 27W x 2

Meter light 12V 1.7W x 3

Indicator light wattage / quantity:

"Neutral" 12V 3.4W x 1

"High Beam" 12V 3.4W x 1

"Oil Level" 12V 3.4W x 1

"Turn" 12V 3.4W x 1

 

Maximum load 200 kg (440 lb) Load is the total weight or cargo, rider, passenger, and accessories.

Specifications (Continued - From Internet and Estimates)

From Internet

Maximum power 49 ~ 61.0 HP @ 8,500 RPM

Maximum Torque 5.6 kg-m (40.5 ft-lb) @ 7,000 RPM

0-400m (quarter mile): 13.7 sec

Top speed: 190 Km/hr (118.06 Mph)

Estimates

Average fuel consumption: 18.7 Km/liter, 5.34 L/100KM, 43.98 MPG

Estimated Endurance 317.9 km full tank, Normal 252.45 km, Reserve 65.45 km

Fuel Tank Capacity Breakdown 17.0 liters (3.7 Imp Gal) - 13.5 Normal, 3.5 Reserve

 

Home | Up | Motorcycle Blog | Motorcycle Trips | Motorcycle Costs | Motorcycle Products | Seca Specs

This site was last updated 06/22/05